Along with the signature 5 fullers, these PDW Ti-SAK scales also have the factory pen slot, toothpick slot, tweezer slot, and the stick pin slot. The matched billet titanium pocket clip uses the standard 3 screw pattern so the user can swap out the clip and personalize with other after market pocket clips
Please note that these are intended as a permanent replacementfor the factory scales. These are precisely machined to match the brass ferrules of a 91mm SAK and will easily press fit into place with a vice or clamps and a piece of leather to pad the jaws. *Warning, when using other after market 3 hole pattern pocket clips, make sure you use the correct length machine screws so they are not so long where they will press out the flush fit titanium scale. Modification of your 91mm type SAK with these titanium scales are done so at your own risk. This is a home DIY modification. Install with caution, know what you are doing, know how to operate a vice or clamps safely. Prometheus Design Werx INC and Bushgear is not to be held responsible for any damage to your SAK and the titanium scales during installation. Please click here for step by step installation instructions.